AEON MIRA7 · Geotech, Tbilisi
AEON MIRA7 — an all-in-one CO₂ laser, 700 × 500 mm — Classic or Redline
Cooling, exhaust and air assist are built into the machine — plug it in and work. Choose the Classic for the best price or the Redline MIRA7S with a built-in camera, Wi-Fi and up to 4 000 mm/s with an RF tube.
- Work area 700 × 500 mm
- Cooling, exhaust and air built in
- Installation at your place
- 1.5-year local warranty
Prices in GEL with shipping, customs and VAT included. Instalments available.
What you can make with the AEON MIRA7
Signs, gifts, packaging, leather goods and engraved glass — cut and engraved on one machine.
What can a CO₂ laser work with?
Cutting thickness depends on the tube power and the material — up to 30 mm on Redline, 20 mm on Classic.
| Material | Engrave | Cut | Note |
|---|---|---|---|
| Wood, plywood, MDF | ✓ | ✓ | Thickness depends on tube power |
| Acrylic | ✓ | ✓ | Clean, polished cut edge |
| Leather, fabric, felt | ✓ | ✓ | Patches, labels, cut-outs |
| Paper, cardboard | ✓ | ✓ | Use the flat or blade table |
| Glass, stone, ceramics | ✓ | — | Engraving only |
| Anodised or painted metal | ✓ | — | Removes the coating — bare metal needs a fiber laser |
| PVC and vinyl | — | — | Never — releases toxic, corrosive gas |
Choose your version and laser tube
Classic for the best price, Redline for the newest features. Pick the tube power — the price updates.
MIRA7
The proven all-in-one MIRA7 at the lowest price: 1 200 mm/s and stepper motors.
Laser tube
MIRA7S
New generation: built-in LightBurn camera, Wi-Fi, autofocus and 4000 DPI.
Laser tube
MIRA7S RF
RF metal tube and servo motors: up to 4 000 mm/s at 8G for fine, fast engraving.
Laser tube
Not sure which tube? Tell us your material and thickness — we suggest the right power.
What is in the box
What comes with each version:
- MIRA7 Classic: machine with built-in cooling, air pump and exhaust
- MIRA7 Classic spares: Hailea air pump, WJ5000 chiller, 750 W blower, air tubes, wrench set, focal block, manual, USB disk
- MIRA7S: machine with built-in cooling, 75 W exhaust and 85 W air assist
- MIRA7S: LightBurn camera and LightBurn software included
- MIRA7S: honeycomb, blade and flat metal worktables
We install the laser at your place, set up LightBurn and run your first job together.
Specifications
Specifications
Work area and size
| Work area | 700 × 500 mm |
|---|---|
| Z lift | 140 mm |
| Max. load on the table | 25 kg |
| Machine size | 1 128 × 945 × 510 mm |
| Net / gross weight | 180 kg / 230 kg |
Laser and motion
| Laser tube | 60 W CO₂ glass tube |
|---|---|
| Max. engraving speed | 1 200 mm/s |
| Acceleration | 5G |
| Max. cutting speed | 680 mm/s |
| Positioning precision | ≤0.01 mm |
| Max. scanning precision | 4000 DPI |
| Min. engraving size | 1.0 × 1.0 mm (Latin letters) |
| Cutting thickness | 0–30 mm, depends on the material |
Built in
| Camera | LightBurn camera, built in |
|---|---|
| Autofocus | Yes |
| Red dot positioning | Yes, with beam combiner |
| Wi-Fi | Built in |
| Exhaust fan | Built in, 75 W |
| Air assist | Built in, 85 W |
| Water cooling | Built in |
| Worktables | Honeycomb, blade and flat metal |
| Pass-through door | Yes |
Software, power and safety
| Software | LightBurn (included) and RDWorks |
|---|---|
| File formats | DSP, PLT, BMP, DXF, AI |
| Power supply | 220 V single phase, 50/60 Hz |
| Safety | Lid interlock, key lock |
Source: official AEON specifications.
Geotech service
- 1.5-year warranty from Geotech in Georgia.
- Installation at your place: 300 ₾ in Tbilisi, about 800 ₾ in Kutaisi, about 1 200 ₾ in Batumi.
- Training on your own machine and support in Georgian and Russian.
Accessories
Rotaries and stands for the MIRA7 — prices in GEL with VAT.
Classic or Redline?
| MIRA7 Classic | MIRA7S | MIRA7S RF | |
|---|---|---|---|
| Laser tubes | 60W / 80W glass | 60W / 80W / 90W glass | RF 30W / 60W metal |
| Work area | 700 × 450 mm | 700 × 500 mm | 700 × 500 mm |
| Max engraving speed | 1 200 mm/s | 1 200 mm/s | 4 000 mm/s |
| Acceleration | 5G | 5G | 8G |
| Motors | Stepper | — | AC servo |
| Camera | Not included | LightBurn, built in | LightBurn, built in |
| Cutting thickness | up to 20 mm | up to 30 mm | up to 30 mm |
| Price from | 14 429 ₾ | 17 259 ₾ | 22 749 ₾ |
| See it | See it | See it |
Why buy AEON from Geotech?
You get the same machine — plus setup, training and a local team in Tbilisi when you need help.
Installation at your place
We install the laser at your workshop and run the first job with you.
LightBurn set up
Software installed, connected and configured on your computer.
Hands-on training
Materials, settings and safety, on your own machine.
1.5-year local warranty
Warranty handled here in Georgia — no shipping abroad.
Rotaries, stands & parts
Rotaries, stands, tubes, lenses and mirrors from one supplier.
Support in your language
Georgian and Russian support from our team.
What our customers say
Real reviews from our customers on Google.
Review on GoogleRead the full review on GoogleFrequently asked questions
Classic or Redline MIRA7S?
Both cut and engrave the same materials. The MIRA7S adds a built-in LightBurn camera, Wi-Fi, 4000 DPI and a flat metal table; the RF versions engrave much faster with servo motors. Take the Classic if price matters most.
Glass tube or RF tube?
A glass tube cuts thicker material for less money. An RF metal tube engraves finer and much faster, and lasts longer — best for engraving-heavy production.
How much is installation?
We install AEON lasers at your place: 300 ₾ in Tbilisi, about 800 ₾ in Kutaisi and about 1 200 ₾ in Batumi. Training is included.
What warranty do I get?
1.5 years from Geotech, handled here in Georgia. Laser tubes, lenses and mirrors are consumables with their own terms — ask us for details.
What software do I need?
Redline models come with LightBurn and the LightBurn camera. Classic models work with RDWorks and LightBurn. We install it and show you how to make your first file.
Can it mark bare metal?
No. A CO₂ laser marks anodised or painted metal, but bare steel and aluminium need a fiber laser. Ask us about fiber markers.
Not sure the AEON MIRA7 is right for you?
Tell us what you want to make and from what material — we will tell you honestly which AEON fits.





