Skip to Content
Try the machine on your material before you buy — book a free test

AEON MIRA5 · Geotech, Tbilisi

AEON MIRA5 — an all-in-one CO₂ laser, 500 × 300 mm — Classic or Redline

Cooling, exhaust and air assist are built into the machine — plug it in and work. Choose the Classic for the best price or the Redline MIRA5S with a built-in camera, Wi-Fi and up to 3 500 mm/s with an RF tube.

from 11 669 ₾installation from 300 ₾, training included
  • Work area 500 × 300 mm
  • Cooling, exhaust and air built in
  • Installation at your place
  • 1.5-year local warranty

Prices in GEL with shipping, customs and VAT included. Instalments available.

500 × 300 mmwork area
3 500 mm/smax engraving speed with an RF tube
≤0.01 mmpositioning precision (Redline)
1.5years of local warranty

What you can make with the AEON MIRA5

Signs, gifts, packaging, leather goods and engraved glass — cut and engraved on one machine.

AEON MIRA5 video
Marble engravingRF tube on stone
AEON MIRA5 video
Leather patchesFine engraving on leather
AEON MIRA5 video
Everything about the 5SOwner review
Acrylic signs and lettersWooden gifts and boxesLeather patches and labelsEngraved glass and tumblersPackaging and cardboard modelsStamps and plaquesFabric and felt cut-outs

What can a CO₂ laser work with?

Cutting thickness depends on the tube power and the material — up to 30 mm on Redline, 20 mm on Classic.

MaterialEngraveCutNote
Wood, plywood, MDF✓✓Thickness depends on tube power
Acrylic✓✓Clean, polished cut edge
Leather, fabric, felt✓✓Patches, labels, cut-outs
Paper, cardboard✓✓Use the flat or blade table
Glass, stone, ceramics✓—Engraving only
Anodised or painted metal✓—Removes the coating — bare metal needs a fiber laser
PVC and vinyl——Never — releases toxic, corrosive gas

Choose your version and laser tube

Classic for the best price, Redline for the newest features. Pick the tube power — the price updates.

AEON MIRA5
Classic

MIRA5

The proven all-in-one MIRA5 at the lowest price: 1 200 mm/s and stepper motors.

Work area500 × 300 mm
CameraNot included

Laser tube

11 669 ₾11 909 ₾incl. VAT · installation from 300 ₾
AEON MIRA5S
Redline

MIRA5S

New generation: built-in LightBurn camera, Wi-Fi, autofocus and 4000 DPI.

Work area500 × 300 mm
CameraBuilt in

Laser tube

13 819 ₾14 059 ₾incl. VAT · installation from 300 ₾
AEON MIRA5S RF
Fastest

MIRA5S RF

RF metal tube and servo motors: up to 3 500 mm/s at 8G for fine, fast engraving.

Max speed3 500 mm/s
Acceleration8G

Laser tube

19 999 ₾27 849 ₾incl. VAT · installation from 300 ₾

Not sure which tube? Tell us your material and thickness — we suggest the right power.

What is in the box

What comes with each version:

  • MIRA5 Classic: machine with built-in cooling, air pump and exhaust
  • MIRA5 Classic spares: air pump, water pump, turbo blower, air tubes, wrench set, focal block, manual, USB disk
  • MIRA5S: machine with built-in cooling, 75 W exhaust and 85 W air assist
  • MIRA5S: LightBurn camera and LightBurn software included
  • MIRA5S: honeycomb, blade and flat metal worktables

We install the laser at your place, set up LightBurn and run your first job together.

AEON MIRA5

Specifications

Specifications

Work area and size

Work area500 × 300 mm
Z lift140 mm
Max. load on the table15 kg
Machine size900 × 700 × 410 mm
Net / gross weight110 kg / 125 kg

Laser and motion

Laser tube60 W CO₂ glass tube
Max. engraving speed1 200 mm/s
Acceleration5G
Max. cutting speed680 mm/s
Positioning precision≤0.01 mm
Max. scanning precision4000 DPI
Min. engraving size1.0 × 1.0 mm (Latin letters)
Cutting thickness0–30 mm, depends on the material

Built in

CameraLightBurn camera, built in
AutofocusYes
Red dot positioningYes, with beam combiner
Wi-FiBuilt in
Exhaust fanBuilt in, 75 W
Air assistBuilt in, 85 W
Water coolingBuilt in
WorktablesHoneycomb, blade and flat metal
Pass-through doorYes

Software, power and safety

SoftwareLightBurn (included) and RDWorks
File formatsDSP, PLT, BMP, DXF, AI
Power supply220 V single phase, 50/60 Hz
SafetyLid interlock, key lock

Source: official AEON specifications.

Geotech service

  • 1.5-year warranty from Geotech in Georgia.
  • Installation at your place: 300 ₾ in Tbilisi, about 800 ₾ in Kutaisi, about 1 200 ₾ in Batumi.
  • Training on your own machine and support in Georgian and Russian.

More AEON MIRA5 videos

AEON videos — press play to watch here.

AEON MIRA5 video
MIRA S 5030 / 7050 / 9060The three sizes side by side
AEON MIRA5 video
MIRA S RedlineOverview
AEON MIRA5 video
Redline explainedEverything you need to know

Classic or Redline?

MIRA5 ClassicMIRA5SMIRA5S RF
Laser tubes40W / 60W glass40W / 60W glassRF 30W / 60W metal
Work area500 × 300 mm500 × 300 mm500 × 300 mm
Max engraving speed1 200 mm/s1 200 mm/s3 500 mm/s
Acceleration5G5G8G
MotorsStepper—AC servo
CameraNot includedLightBurn, built inLightBurn, built in
Cutting thicknessup to 20 mmup to 30 mmup to 30 mm
Price from11 669 ₾13 819 ₾19 999 ₾
See itSee itSee it

Why buy AEON from Geotech?

You get the same machine — plus setup, training and a local team in Tbilisi when you need help.

01

Installation at your place

We install the laser at your workshop and run the first job with you.

02

LightBurn set up

Software installed, connected and configured on your computer.

03

Hands-on training

Materials, settings and safety, on your own machine.

04

1.5-year local warranty

Warranty handled here in Georgia — no shipping abroad.

05

Rotaries, stands & parts

Rotaries, stands, tubes, lenses and mirrors from one supplier.

06

Support in your language

Georgian and Russian support from our team.

What our customers say

Real reviews from our customers on Google.

Review on GoogleRead the full review on Google

Read all reviews on Google

Frequently asked questions

Classic or Redline MIRA5S?

Both cut and engrave the same materials. The MIRA5S adds a built-in LightBurn camera, Wi-Fi, 4000 DPI and a flat metal table; the RF versions engrave much faster with servo motors. Take the Classic if price matters most.

Glass tube or RF tube?

A glass tube cuts thicker material for less money. An RF metal tube engraves finer and much faster, and lasts longer — best for engraving-heavy production.

How much is installation?

We install AEON lasers at your place: 300 ₾ in Tbilisi, about 800 ₾ in Kutaisi and about 1 200 ₾ in Batumi. Training is included.

What warranty do I get?

1.5 years from Geotech, handled here in Georgia. Laser tubes, lenses and mirrors are consumables with their own terms — ask us for details.

What software do I need?

Redline models come with LightBurn and the LightBurn camera. Classic models work with RDWorks and LightBurn. We install it and show you how to make your first file.

Can it mark bare metal?

No. A CO₂ laser marks anodised or painted metal, but bare steel and aluminium need a fiber laser. Ask us about fiber markers.

Not sure the AEON MIRA5 is right for you?

Tell us what you want to make and from what material — we will tell you honestly which AEON fits.

Message us on WhatsApp
WhatsApp